Handmade 'Piggy' Harnesses

All our bespoke harnesses are individually handmade to order from your measurements and are fully adjustable to allow for comfort and growing room for your pet piggy. They are easy to fit with two 'curved' nylon quick side release safety clips, positioned on the left hand side of the harness as shown in the picture below.

Picture above shows are our large 25mm 'A' Harness in red with matching 25mm lead as looking down onto the piggies shoulders.

The standard harness webbing is made from strong 350lbs tested Polypropylene and you can choose from two different harness styles, firstly there is the standard 'A' harness pictured above, or the alternative 'H' harness pictured below, both are available in a range of colours in two different width fittings. The 15mm (for small piggies) is available in red, baby pink, black, royal blue, rainbow and emerald green, while the 25mm (for the larger piggies) is available in red, baby pink, black, royal blue, rainbow, purple and emerald green.

The harnesses are also available in 25mm 'cushion' or comfort webbing, this is different from the standard webbing in that its a double layered
and lightly padded making it soft and durable but just as strong. These are available in a range of colours including baby pink, cerise pink, black,
royal blue, emerald green and red.

Picture above shows are our large 25mm 'H' Harness in blue showing the additional strap running along the piggies back joining the neck and girth starps,
while the 'D' ring for the lead is positioned towards the back on the girth strap. All colours and webbing styles as outlined above.

Measuring your Piggy for their harness

We just require you to take some simple measurements of your piggy. Firstly measure them around their girth, that's right behind the front legs and up
over their shoulder. Then take a second measurement around their neck in front of the two front legs. Simple! I would then suggest you then retake the measurements again just to ensure everything is correct, as any errors may involve the harness being made with incorrect measurements. You may supply
us with your measurements in imperal or metric. There are a couple of pictures below that you may find helpful, it's also a handy hint to throw a
small handful of pig nuts down in order to keep them occupied for the few moments it takes.

Picture above shows the first measurement being taken around the piggies girth, so you can see the tape passes under the body just behind the front legs,
then up and over the shoulder.

The above picture shows the second measurement being taken, again passing the tape under your piggies neck and bringing it up over the shoulders,
as this is where the harness will sit.

The gorgeous piggy modelling our harnesses is my own pet piggy named 'Piglet' who weighs approximately twenty one stone (300lbs).

Copyright©Piggyharnesses.co.uk 2018